Aquatec 8800 Booster Pump 3/8" QC 24V

Part #: 200768
Please Login / Sign Up
Aquatec 8800 Series Pumps are used in RO systems with flow rates greater than 50 GPD. Reverse osmosis systems require pressure to work properly. A booster pump is suggested for applications where the feed water pressure is low, and where there are high levels of Total Dissolved Solids (TDS) in the water. The 8852-2J03-B423 is designed for operation with a tank shut-off switch (PSW), which shuts off the RO booster pump when the storage tank becomes full. In under-counter RO systems the PSW can be coupled with an Electronic Shut-Off valve (ESO) in order to shut off the feed supply so the system does not waste water.

  • Outstanding toughness, durability
  • EMI/RFI electronic noise suppression
  • Expels trapped air and eliminates "air locks"
  • Pumphead can be mounted up or down
  • Improved venting system removes moisture
  • Corrosion resistant exterior
  • Connections: 3/8" QC
  • Designed for 15,000+ operating hours
  • Outlet pressures up to 125 PSI
  • Extremely quiet operation, less than 52 DBA
  • Runs dry without damage
  • Self-priming, 60 inch lift
  • Low voltage (24V) for maximum safety
  • Aquatec Model: 8852-2J03-B424

Additional Specifications:
For the best experience, the following accessories are recommended for purchase with your RO booster pump: 8800 Series Transformer 120V/24VAC  - (required)

The 8800 Series Transformer 120V/24VAC connects pump to electrical outlet to provide power.

  • Amps: 0.53-1.2 Amps @ 0-80 PSI
  • Diaphragm Materials: Santoprene
  • Housing Material: Nylon
  • Inlet Pressure: 125 PSI
  • Liquid Temperature: 170 °F
  • Motor Rpm: 870 RPM
  • Power Source: Bell Ends w/ Lead Wires
  • Pump Max Flow Rate (Gpm): 0.66
  • Pump Max Pressure (PSI): 125
  • Push-In Size: 3/8” OD
  • Series: 8800
  • Voltage Type: AC
  • Wire Option: Bare Wire
  • Type: Diaphragm Pump
  • Voltage: 24 VAC


Have a Question?

Be the first to ask a question about this.

Ask a Question


Need help finding a replacement part? Fill out our part request form and someone will get back to you shortly. Can’t wait? You can also call our customer support line.