210339 - PUMP, BOOSTER, 8800, 1/4" QC, AQUATEC
Couldn't load pickup availability
Aquatec 8800 Series Pumps are used in RO systems with flow rates greater than 50 GPD. Reverse osmosis systems require pressure to work properly. A booster pump is suggested for applications where the feed water pressure is low, and where there are high levels of Total Dissolved Solids (TDS) in the water. The 8841-2J03-B424 is designed for operation with a tank shut-off switch (PSW), which shuts off the RO booster pump when the storage tank becomes full. In under-counter RO systems the PSW can be coupled with an Electronic Shut-Off valve (ESO) in order to shut off the feed supply so the system does not waste water.
Features:
- Outstanding toughness, durability
- EMI/RFI electronic noise suppression
- Expels trapped air and eliminates "air locks"
- Pumphead can be mounted up or down
- Improved venting system removes moisture
- Corrosion resistant exterior
- Amps: 0.53-1.2 Amps @ 0-80 PSI
- Diaphragm Materials: Santoprene
- Housing Material: Nylon
- Inlet Pressure: 125 PSI
- Liquid Temperature: 170 °F
- Motor Rpm: 870 RPM
- Power Source: Bell Ends w/ Lead Wires
- Pump Max Flow Rate (Gpm): 0.66
- Pump Max Pressure (PSI): 125
- Push-In Size: 3/8” OD
- Series: 8800
- Voltage Type: AC
- Wire Option: Bare Wire
- Type: Diaphragm Pump
- Voltage: 24 VAC
Q&A
Have a Question?
Be the first to ask a question about this.
NEED HELP?
Need help finding a replacement part? Fill out our part request form and someone will get back to you shortly. Can’t wait? You can also call our customer support line.