AXEON Solo I All-In-One 4-Stage 50 GPD RO System
Couldn't load pickup availability
The AXEON® Solo I 50 GPD Reverse Osmosis System contains highly advanced membrane technology. To ensure water is safe, clean, and crisp, this system features four stages of filtration. It is fully integrated with a sediment filter, sintered carbon block, RO membrane, and an inline post carbon. The design allows for fast and easy service. Three of the four cartridges are within a single housing. The fourth stage can either consist of an inline post carbon for improved tasting water or an optional remineralization cartridge which will balance the water's pH level.
Features:
- AXEON High Flow 50 gpd Solo RO Membrane
- AXEON 2-in-1 Sintered Carbon Block with 5 Micron
- AXEON Inline Post Carbon
- 3.2 Gallon Pressurized White Metal Storage Tank
- Designer Long Reach Air-Gap Faucet
- Moisture Sensor
- All Necessary Tubing, Hardware, and Fittings For Installation
- 1-Year Manufacturer's Warranty
Benefits:
- 30% Higher Flow to the Faucet
- 50% Less Water to the Drain
- 50% Smaller Footprint Than Traditional Systems
- High Flow RO Membrane Fills the Tank Faster
- High-Quality Integrated Sediment/ Carbon Filter
- Bottle Quality Water from the Faucet
- Quick and Easy Installation and Service
Stage | Description | Replacement Interval |
1 & 2 |
2 Stage Filter Polypropylene Pre-Filter / Sintered Carbon |
6 - 12 Months |
3 |
50 GPD Reverse Osmosis Membrane |
12 Months |
4 |
Inline Post Carbon (Prior to Faucet) |
6 - 12 Months |
5 |
Optional: Inline Remineralization Cartridge |
6 - 12 Months |
- AXEON® Solo I Reverse Osmosis System Spec Sheet
- AXEON® Solo I Reverse Osmosis System User Manual
- AXEON® Solo I Reverse Osmosis System Quick Start Guide
- AXEON System Warranty
- Membrane Ion Rejection Rates
- AXEON Water Filtration Range And Sizing Table
- AXEON RO Membrane Troubleshooting Matrix
- AXEON Membrane Element Warranty
- AXEON Membrane Temperature Correction Factor
Specifications:
- Model: Solo I
- AXEON Part Number: 211470
- Capacity (gpd): 50
Design:
- Configuration: Single Pass
- Feedwater Source: <1,000 ppm of TDS
- Standard Recovery Rate %: 33
Rejection and Flow Rates:
- Nominal Salt Rejection %: 96
- Permeate Flow (gpd): 50
Connections:
- Feed (in): 3/8" QC
- Permeate (in): 3/8" QC
- Concentrate (in): 3/8" QC
Membranes:
- Membrane Quantity: 1
- Membrane Size: Solo 50 GPD
Pumps:
- Pump Type: N/A
System Electrical:
- Standard Voltage + Amp Draw: N/A
Operating Limits:
- Maximum Feed Temperature (°F / °C): 100 / 38
- Minimum Feed Temperature (°F / °C): 40 / 4
- Maximum Feed Pressure (psi / bar): 40 / 2.76
- Minimum Feed Pressure (psi / bar): 80 / 5.52
- Maximum Feed Silt Density Index (SDI): < 5
- Maximum Turbidity (NTU): < 1
- Maximum Free Chlorine (ppm): < 1
- Maximum TDS (ppm): < 1,000
Warranty:
- 1-Year Warranty
Q&A
Have a Question?
Be the first to ask a question about this.
NEED HELP?
Need help finding a replacement part? Fill out our part request form and someone will get back to you shortly. Can’t wait? You can also call our customer support line.